CAD-CUT® Premium Plus™ Heat Transfer Vinyl
The best for decorating performance wear.
With superior stretch and rebound, this low-temp HTV is a great choice for application to performance wear. It can be applied at temperatures as low as 280°, meaning heat-sensitive fabrics like spandex can be decorated without fear of scorching.
Applies at a low temp to prevent scorching on heat-sensitive items
Soft & Stretchable
Silky matte finish
Choose low tack for larger designs, high tack for more detailed designs
High tack peels hot for quick production and no distortion of design on stretchy fabrics
New range of bright colors
Laser cutter compatible
Composition: Polyurethane (PU)
Carrier: Frosted, Pressure-Sensitive
Thickness: Low Tack: 80-108 microns/.080-108mm High Tack: 92 microns/.092mm
Two-Color 5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.
Heated Lower Platen Application - 100% Polyester
Time:10 seconds (depending on thickness of garment)
Pressure:60 psi (#6/Medium on Hotronix machines)
Peel:Warm for Low Tack; Hot for High Tack
Note:Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.