Material Overview
UltraWeed™ is the go-to material you need for everyday heat printing projects. With smooth cutting on any vinyl cutter, effortless weeding, and low temp application, it’s guaranteed to give you the ultimate, worry-free application from start to finish.
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: High-Tack, Clear
- Thickness: 90-100 microns (.09-.1mm)
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
Please note that color may differ slightly from how it appears on your screen due to varying monitor settings in each of my listings.
Application Instructions
1-Color Application Instructions
Time: 12 seconds
Temperature: 260-300°F
Pressure: Medium
Peel: Hot
2-Color Application Instructions
Time: Press background layer for 2-3 seconds, place foreground layer for full application of 12 seconds
Temperature: 260-300°F
Pressure: Medium
Peel: Hot
Hotronix® 360 IQ™ Hat Press
Time: 45 seconds
Upper: 280°F
Lower: 320°F
Pressure: Medium
Peel: Warm/Cold
Special Notes
If the garment is 50% or more cotton it will require 280°F + degrees.
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- Cotton/Poly Blends
- Lycra®/Spandex Blends
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.